Buck Power Supply GUI Environment

The figure shown is an example of MPLAB® X IDE with the MCP19110/11/18/19 Buck Power Supply Graphical User Interface (GUI) Plug-In installed (bottom left) and the MCP1911X project opened (top left) in the Projects Window. On the right are the Editor Pane and the Output Window.

buck-gui-environment.PNG
​

The MCP19110/11/18/19 – Buck Power Supply GUI Plug-In is preset to be used with the MCP19111 Evaluation Board (ADM00397).

​

  Return to Top

© 2021 Microchip Technology, Inc.
Notice: ARM and Cortex are the registered trademarks of ARM Limited in the EU and other countries.
Information contained on this site regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.