Lab 2: Log Data to SD Card

< Back to Lab Index

Next Step >

Step 2: With MHC, configure File System Service

1

Open MHC by going to Tools > Embedded > MPLAB Harmony 3 Configurator.

2

Add the File System service under Available Components > Harmony > System Services > FILE SYSTEM

lab2_step2_02.png
Figure 1: Add File System

The File System component is now part of the Project Graph. Leave the File System settings at their default values.

lab2_step2_03.png
Figure 2: File System Settings


Next Step >

  Return to Top

© 2021 Microchip Technology, Inc.
Notice: ARM and Cortex are the registered trademarks of ARM Limited in the EU and other countries.
Information contained on this site regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.