Lab 4: Add HTTP Web Server to Visualize Data

Step 1: Rename Project


Since you are working on Lab 4, you are going to rename the existing project and overwrite the code from the previous lab.

To rename the project, right-click on your project name on MPLAB X IDE and select Rename. Then, change the name to pic32_wfi32e_lab4, tick the box Also Rename Project Folder, and press Rename.

Figure 1: Rename Project

Note: If required, you can make a copy of the existing project.

Note: If required, you can start from the solution of the previous Lab located in the folder: <your unzipped folder path>\getting_started_pic32_wfi32e\Lab3\solution.

Next Step >

© 2021 Microchip Technology, Inc.
Notice: ARM and Cortex are the registered trademarks of ARM Limited in the EU and other countries.
Information contained on this site regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.