Lab 4: Add HTTP Web Server to Visualize Data

< Back to Lab Index

Next Step >

Step 3: With MHC, Configure HTTPNET Server Component

1

Under APPLICATION LAYER view:

  • Select TCP/IP Application Layer Configurator.
  • Tick HTTPNET SERVER.
  • Reply Yes to activate the Presentation Layer (net_Pres).
lab4_step3_01a.png
Figure 1: Enable HTTPNET Server
lab4_step3_01b.png
Figure 2: Activate Presentation Layer

2

Select the HTTPNET SERVER component added to the Project Graph and observe the settings.

For this lab, you will use the default settings.

lab4_step3_02.png
Figure 3: Keep HTTPNET SERVER Default Settings


Next Step >

  Return to Top

© 2021 Microchip Technology, Inc.
Notice: ARM and Cortex are the registered trademarks of ARM Limited in the EU and other countries.
Information contained on this site regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.